DupliColor presto Contact Cleaner (400ml)

presto Contact Cleaner is a high-quality cleaner that ensures long-lasting conductivity for contacts.

6,86 €

17,15 € per 1 l

incl. 19% VAT , plus

presto Contact Cleaner is a high-quality cleaner that ensures long-lasting conductivity for contacts.

For use on:

Do not spray onto carburettors or coolers!

Quality and Properties

Powerful cleaner without leaving a residue
Removes dirt and oxidation
Moisture repellent
Corrosion protection
Non corrosive
Excellent adhesion
Non conductive
Powerful, directed jet spray
This product has a special cap containing a tube and a spray head, which can be used to reach tricky places
Sprayable from any angle due to a special 360° valve.
TRG 300 compliant

Physical and Chemical Data

Basis: Aliphatic Hydrocarbons with alcohol
Colour: transparent
Smell: characteristic
Propellant: carbon dioxide
Relative density at 20°C: 0.73 g/ml
Yield: 3.8 g/sec.
Refractive index at 20°C: 1.370
Vapour pressure at 20°C: 5.5 - 6.5 bar
Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size: aerosol can, maximum nominal volume 400 ml

Environment and Labelling

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using Instructions

Application:

Bring can to room temperature.
Operating temperature 5° to 30°C.
Switch off electronic and electrical equipment before use so that there is no current at all.
Shake for 2 minutes before use.
Spray the parts to be cleaned with presto Contact Cleaner.
After cleaning wait to all combustible solvent steam has disappeared (after 15 minutes at least).
Only then turn on equipment.

Item information	Value
Content:	0,40 l

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Question about item

Your question